3-Port Solenoid Valve VQZ100/200/300 Series, Single Unit, Body Ported
Product Description
SMC Solenoid Valve.
[Features]
· An external pilot specification that can be used for applications in a vacuum.
· Can be mounted on an aluminum integrated type manifold or a DIN rail.
· Manifold type numbers: VV3QZ12, VV3QZ15, VV3QZ22, VV3QZ25, VV3QZ32, VV3QZ35.
Download
3-Port Solenoid Valve VQZ100/VQZ200/VQZ300 Series, Single Unit, Body Ported Type Specifications
3-Port Solenoid Valve VQZ100/VQZ200/VQZ300 Series, single unit, body ported type external appearance
| Valve Construction | Metal Seal | Rubber Seal | VQZ100 (poppet seal) |
|---|---|---|---|
| Fluid | Air | ||
| Maximum Operating Pressure (MPa) | 0.7 (High-pressure type: 1.0) | 0.7 | 0.7 (High-pressure type: 1.0) |
| Minimum Operating Pressure MPa | 0.1 | 0.15 | 0.15 |
| Ambient Temperature and Operating Fluid Temperature °C | -10 to +50 (no freezing) | ||
| Maximum Operating Frequency Hz | 20 | 5 | 20 |
| Pilot valve exhaust method | Individual exhaust | Centralized exhaust *1 | |
| Lubrication | Not required | ||
| Manual | Push type / locking type (tool required) | ||
| Mounting Orientation | Free | ||
| Impact Resistance / Vibration Resistance: m/s2 * | 150/30 | ||
| Enclosure * | Dust-proof (DIN terminal: IP65 *3) | ||
*Based on IEC60529.
*1: The body ported type single unit uses individual exhaust.
*2: Shock resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
*3: When IP65 compliant DIN terminals: VQZ2/3□2□-□Y□□W1-□□
Solenoid Specifications
| Electrical Entry | Grommet (G) M-type plug connector (M) L-type plug connector (L) DIN terminal (Y) |
|||
|---|---|---|---|---|
| G, L, M | Y | |||
| Coil rated voltage (V) | DC | 24, 12 | ||
| AC 50/60 Hz | 100, 110, 200, 220 * | |||
| Allowable Voltage Fluctuation | ±10% of rated voltage * | |||
| Power Consumption W | DC | Standard | 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)] | |
| High Speed Response, High Pressure | 0.9 (with light: 0.95 [with DIN terminal light: 1.0]) | |||
| Apparent power VA * | AC | 100 V | 0.78 (with light: 0.81) | 0.78 (with light: 0.87) |
| 110 V [115 V] | 0.86 (with light: 0.89) [0.94 (with light: 0.97)] | 0.86 (with light: 0.87) [0.94 (with light: 1.07)] | ||
| 200 V | 1.18 (with light: 1.22) | 1.15 (with light: 1.30) | ||
| 220 V [230 V] | 1.30 (with light: 1.34) [1.42 (with light: 1.46)] | 1.27 (with light: 1.46) [1.39 (with light: 1.60)] | ||
| Surge Voltage Suppressor | Varistor | |||
| Indicator Light | LED (neon bulb for DIN terminal AC) | |||
- *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
- For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
